MCBAIN
231-825-2416
After Hours Support- After Hours Parts: 231-884-7077
- After Hours Service: 231-920-1319
- After Hours Precision Farming: 989-330-8741
*Charges Will Apply To After Hours Services*
ITHACA
989-436-8181
After Hours Support- After Hours Parts: 989-944-5548
- After Hours Service: 989-444-9408
- After Hours Precision Farming: 989-330-8741
*Charges Will Apply To After Hours Services*
BEAL CITY
989-644-2252
After Hours Support- After Hours Parts: 989-294-3039
- After Hours Service: 989-294-3038
- After Hours Precision Farming: 989-330-8741
*Charges Will Apply To After Hours Services*
PLM Products
XCN—2050
The introduction of the XCN-2050™ begins a new chapter in the high performance precision agriculture displays available from CNH. As the display platform for all Trimble precision agricultural applications and solutions, the XCN-2050 will feature a modular architecture that will allow for easy expansion and connectivity. The 12.1" wide-screen high definition display with multi-touch will feature an all-new user interface built on the Android™ operating system. A high-performance GNSS receiver with GPS and GLONASS is included in the base package.
FM-1000 Display
Precision agriculture applications in a single package. The Advanced FM-1000 display from New Holland features a large 12"/305mm colour touch screen, combined with logical functionality and ease of use, the FM-1000 integrated display operates as either a stand-alone manual guidance system or as part of an automated guidance, implement control or steering system.
FM-750 Display
The FM-750 is a multi functional guidance display that offers key precision agriculture functionality and is compatible with a wide range of accuracy levels. It is an ideal solution for almost any crop type, field shape or soil type.
EZ Guide 250
Explore GPS guidance through this simple and affordable lightbar. Ready to operate straight out of the box, the EZ-Guide® 250 is a powerful tool offering you an accuracy of about 30cm pass to pass.
Intelliview IV
Looking for a bigger display for your tractor? Look no further than the 10.4" In- telliview™ IV. Both the IntelliView™ III and IntelliView™ IV displays communicate directly with the IntelliSteer™ autoguidance system together with the machine’s CAN Bus, and display key operating parameters in real time on just one screen. Maximum operator comfort is guaranteed thanks to the intuitive operating logic which enables you to see just where you are, and enables you to select the pre- cise information you wish to browse, monitor and control. The IntelliView™ IV also allows you to connect up to 3 cameras to the display.
EZ Pilot System
The EZ-Pilot™ assisted steering system provides high-accuracy steering at an affordable price. EZ-Pilot turns the wheel for you with a compact electric motor drive using guidance from select Trimble displays - helping you stay on line and improve efficiency. EZ-Pilot uses T3™ sensors to calculate the actual position of the vehicle to help minimize skips and overlaps in areas with rolling terrain, slopes, and rough ground.
NAV II Controller
Employing the industry leading T3™ Terrain Compensation technology, the Navigation Controller II takes remote space position information from the DGPS receiver, and sends precise steering instructions to the vehicle, ensuring on-line performance, even when operating in hillsides or rough terrain.
NH 372 GNSS Receiver
This receiver is GLONASS enabled and has the ability to track up to 44 satellites at any one time, greatly increasing your satellite coverage and up-time. It is compatible with the IntellISteer™ system and can use WAAS, OmniSTAR, CenterPoint™ RTX and RTK correction signals.
EZ Steer 500
The EZ-Steer® system turns the steering wheel for you by combining a friction wheel and a motor thanks to a GPS guidance signal from the EZ-Guide® 250, EZ- Guide® 500 or FM-1000™. While the EZ-Steer® keeps you on line on undulating land, ditches, waterways and terraces, you can focus on many different tasks, such as sprayer or planter performance, improving job quality and crop yields while reducing stress.
XCN-750 Monitor
The XCN-750™ display is the latest Android™ based, easy-to-use display from CNH Industrial Aftermarket Solutions. This cost-effective solution offers great functionality and a simplified installation process, providing access to auto-steering and application control for every farm.
IntelliSteer Lite Universal Steering Motor
PLM RTK+ is cellular-based guidance correction with sub-inch repeatable accuracy, using dealer-owned RTK base stations that are networked together.
PLM ISO BUS Product Control
Add to your existing implements, section and or variable rate control all through your PLM IntelliView™ IV.
EZ Pilot Pro for IntelliView IV
Advanced steering features in an assisted steering solution using hassle-free AutoCalibration
